Troubleshooting; Technical Specifications - Vitek VT-2340 Manual Instruction

TROUBLESHOOTING

Malfunction Possible causes
No "mist" The unit is connected improperly
The unit is off
Water tank is empty or there
isn't enough water in the tank.
Foreign smell First use
appears
during the
operation
Foreign smell Dirty or stale water
appears
during the
operation
Foreign noise The water tank is installed
improperly.
Not enough water in the tank
The unit is placed on an uneven
surface.
DELIVERY SET
Air humidifier – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 85 W
Water tank capacity: 4,5 L
Water flow: ≥ 300 ml/h
Humidified area: up to 30 m
Remote control: 3 V 2 "AAA" batteries 1.5 V
(not supplied)
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
IM VT-2340.indd 7
2
7
Troubleshooting
Check if the power plug is inserted into the
mains socket.
Switch the unit on by pressing the
button (13).
Fill the water tank with enough water.
Disconnect the unit from the mains. Remove
the water tank, unscrew the lid (5) and pour
the water out of the water tank, then leave
the water tank in a dry cool place for
12 hours.
Unplug the unit, remove the water tank,
unscrew the lid (5), pour the water out of the
water tank and clean the tank (as described
in the chapter "Cleaning and care"),
then fill it with clean water.
Make sure that the water tank is installed
properly.
Fill the water tank with enough water.
Place the unit on a flat steady surface.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru
for receipt of an updated manual.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
ENGLISH
18.01.2019 10:20:56