Cleaning And Care; Troubleshooting - Vitek VT-2342 Manual Instruction

ENGLISH
and the water tank (3). Fill the tank (3) with
water (see chapter "Using the air humidifier").
First install the filled water tank (3) on the
air humidifier body (9) and then install the lid
with nozzle (1).
Switch the unit on for further operation.
–

CLEANING AND CARE

WARNING! Always switch the air humidifier off and
unplug it before cleaning.
Hard water causes appearance of mineral scale in the
process chamber (7) and in the water tank (3) that
leads to improper operation of the unit. To avoid it:
use filtered, boiled and settled water. If tap water
–
is hard, it is recommended to mix tap water with
distilled water in proportion 1:1. If tap water is
very hard, mix it with distilled water in proportion
1:2 or use distilled water only.
Using of water with high content of minerals may
–
lead to white deposits on surfaces near the air
humidifier and it is not a sign of malfunction of
the air humidifier.
Change water in the water tank (3) twice a week.
–
Thoroughly wash the process chamber (7) and
–
the water tank (3) with neutral detergent solu-
tion twice a week.
To clean the "sprayer", add 5-10 drops of deter-
–
gent on it and wait for approximately 10-15 min-
utes. Remove the scale from the sprayer surface
and then wash the process chamber (7) with
neutral detergent solution.
Rinse the process chamber (7) and the water
–
tank (3) several times. Wipe the process cham-
ber (7) with a soft cloth.
Clean the air humidifier body (9) with a soft,
–
slightly damp cloth, and then wipe it dry.
Remove and clean the air inlet grid (9a 10) and
–
the foam filter as it becomes dirty.

TROUBLESHOOTING

Malfunction Possible causes
No "mist" The unit is connected improperly
The unit is off
Water tank is empty or there
isn't enough water in the tank.
Foreign smell First use
appears
during the
operation
IM VT-2342.indd 6
Notes:
do not immerse the air humidifier body into
–
water or any other liquids.
do not use abrasives and solvents for cleaning
–
the "sprayer".
as a cleaning agent for the "sprayer" you can
–
use a descaling agent for kettles, strictly follow-
ing the instruction for this substance.
Mineral filter (5)
The mineral filter purifies water of admixtures, heavy
metal ions, bacteria, removes a foreign smell, pre-
vents appearance of white deposits near the oper-
ating air humidifier.
Cleaning the mineral filter
It is recommended to wash the mineral filter (5)
–
once a month, and when using "hard water", 2-3
times a month.
Remove the water tank (3), unscrew the lid (6)
–
and remove it, remove the mineral filter (5), turn-
ing it counterclockwise.
Wash the filter (5) under running water jet.
–
Install the mineral filter (5) on the lid (6) rotating
–
it clockwise.
STORAGE
Pour the water out of the tank and make
–
sure that the process chamber (7) and the
"sprayer" are dry before taking the unit away
for storage.
Do not keep the air humidifier with water inside
–
the tank (3) or the process chamber (7).
Before taking the mineral filter (5) away for stor-
–
age, clean it and dry; keep the filter (5) in a dark-
ened cool place.
Keep the air humidifier in a dry cool place away
–
from children and disabled persons.
Troubleshooting
Check if the power plug is inserted into the
mains socket.
Switch the unit on by pressing the button (11).
Fill the water tank with enough water.
Disconnect the unit from the mains. Remove
the water tank, unscrew the lid (6) and pour
the water out of the water tank, then leave
the water tank in a dry cool place for 12 hours.
6
11.06.2019 16:31:32