Troubles And Troubleshooting; Delivery Set - Vitek VT-2350 Manual Instruction

remove the filter (6), wash it with tap water and
then install back to its place.
Notes: - the filter (6) cannot completely clean the
water from mineral deposit and is an additional
means of water cleaning.
•
Hard water causes mineral deposits to form on
the working parts of the humidifier: on the level
sensor (5), filter (6), float (7) and in the water
tank (4), this leads to improper operation of the
humidifier and the appearance of white deposit
on interior objects.
•
To avoid this, it is necessary to clean the work-
ing parts of the humidifier weekly and to change
water in the water tank (4) as often as possible.
•
If you are not going to use the air humidifier for a
long time: drain the water from the water tank (4),
rinse it (4), rinse and clean the working parts of
the humidifier, dry thoroughly and store the unit.
Weekly care
•
Thoroughly rinse the water tank (4) and the
working parts of the humidifier once a week with
a neutral detergent solution.
•
Then rinse with water carefully.

TROUBLES AND TROUBLESHOOTING

Problem
The operation symbols do not
light up and there is no mist
release.
The symbol on the display is
glowing red and there is no mist
release.
Mist smells unpleasantly.
Low mist release intensity
Foreign noise during the air
humidifier operation
Notes:
Non-observance of the rules for cleaning the
–
nozzle (1, 2) from mineral deposits affects the
air humidifier performance. In this case clean
the nozzle (1, 2).
If the tap water used is hard, use household fil-
–
ters for additional water cleaning or mix it with
distilled water in proportion 1:1.
•
Add 5-10 drops of the detergent on the nozzle
and wait about 2-5 minutes. Remove the deposit
from the nozzle (1) surface with a brush.
Notes: As a cleaning agent for the sprayer you can
use scale removal substances for kettles.
•
Wipe the motor unit (8) of the humidifier with a
slightly damp soft cloth and then wipe it dry.
•
Do not immerse the motor unit (8), power cord
or plug of the humidifier into water or any other
liquids. Provide that no liquid gets inside the
motor unit (8) of the humidifier.
•
Do not use solvents or abrasives to clean the
surface of the motor unit (8) and the water
tank (4).
STORAGE
•
If you are not going to use the unit for a long time
and want to take it away for storage, make sure
that all its parts are dry, including working parts
of the humidifier and the filter (6).
•
Do not store the unit with water in the water
tank (4).
•
Keep the air humidifier away from children in a
dry, dark and cool place.
Possible causes Troubleshooting
No supply voltage. Connect the unit to the mains.
Plug another, known good appliance to the
socket to make sure that the socket works
properly.
Water tank is empty. Fill the water tank with water.
First use of the unit. Pour out the water and leave the tank open for
12 hours in a cool darkened place
Dirty or stale water. Unplug the unit, remove the water tank, pour
out the water, wash the tank and fill it with
clean boiled or distilled water.
The nozzle is dirty Unplug the unit and clean the nozzle.
(1, 2).
The unit is placed on Unplug the unit and level the unit body or
an uneven or unsta- move the air humidifier to another place.
ble surface.

DELIVERY SET

Air humidifier – 1 pc.
Removable lid with nozzle – 1 pc.
Removable water tank – 1 pc.
Instruction manual – 1 pc.
Instructions for using the TuyaSmart
application – 1 pc.
Warranty certificate – 1 pc.
5
ENGLISH