02.99
3.8
Changing data
Changing valve
data
Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
The following menu display appears when you select softkey "Change valve
data" (see Fig. 3-5):
Fig. 3-13
Menu display "Change data for HLA"
If you press "Abort", the old machine data settings remain valid and you return
to the initial menu display (see Fig. 3-5).
Softkeys "Valve data..." , "Cylinder data..." and "Mounting data..." each call a
display that has the same format as the following screenshot except for display
header and contents (e.g. valve data for HLA):
Fig. 3-14
Menu display "Valve data for HLA"
You can return to menu display "Change data for HLA" (see Fig. 3-13) by press-
ing "Abort" or "OK".
3 Start-Up
3.8 Changing data
3-61