Siemens SINUMERIK 840D Description Of Functions page 213

08.99
02.99
310 775
Explanation
Reaction
Remedy
To continue
program
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
Axis %1, drive %2 overlap between breakpoint range and saturation re-
gion of valve characteristic
%1 = NC axis number
%2 = drive number
The breakpoint range and saturation region of the valve characteristic are over-
lapping.
NC not ready
Switchover for entire channel via MD might be possible.
Channel not ready.
NC Stop in response to alarm.
NC Start disable.
The NC switches to follow-up mode.
Alarm is displayed.
Interface signals are set.
The breakpoint range and saturation region overlap if:
S
positive quadrant: (MD 5465+MD 5466)>MD 5486
S
negative quadrant: (MD 5468+MD 5466)>MD 5488
Enter a valid combination in the above drive MD.
Cancel alarm in all channels by pressing RESET key. Restart the part program.
6 Hydraulics Diagnostics
J
6-213