Target Selection - Garmin G500H Pilot's Manual

4.6.3.1

Target Selection

Traffic targets displayed on the dedicated traffic page may be selected in order
to obtain additional information about a traffic target.
1) Press the small MFD knob to start target selection.
2) Turn the small or large MFD knobs to step through selection of the available
targets.
3) After selecting a target, you can press the small MFD knob to leave the target
selected, and return the small MFD to page selection mode.
4) Use the DESELECT softkey to turn off selected traffic.
ADS-B and
TCAS Status and
Altitude Filter
Map
Orientation
Range Ring
Radius
Basic Directional
Traffic, 4000 ft
Below and
Climbing
Selected Vector
Motion and
Duration
Figure 4-32 ADS-B Traffic Page (Absolute Motion)
Traffic targets within 1200 ft vertical separation and 6NM from
NOTE:
the ownship are depicted as proximate targets.
4-38
Garmin G500H Pilot's Guide
Selected
Traffic Info
Traffic Motion
Vector
Ownship
Icon
Range Rings
Turn Cursor
Knob for
Next Target
190-01150-02 Rev. J