Selecting A New Chart By Fpl, Nrst, Or Recent; Selecting A Chart Manually - Garmin G500H Pilot's Manual

5.1.4.2

Selecting a New Chart by FPL, NRST, or RECENT

You may select other charts to display based on your flight plan (FPL), charts
of the nearest airport (NRST), or your most recently selected airports (RECENT).
1) While viewing the Charts page of the FPL page group, press the SELECT soft
key.
2) Turn the small MFD knob counterclockwise to show FPL, NRST, or RECENT.
3) Turn the large MFD knob to select the desired identifier and then press ENT.
5.1.4.3

Selecting a Chart Manually

A chart for a different airport may be chosen by selecting the identifier for
the desired airport.
Airport Identifier Selection
5-8
Figure 5-7 Chart Category Selection
Figure 5-8 Airport Identifier Selection
Garmin G500H Pilot's Guide 190-01150-02 Rev. J