Precipitation (Precip) Data Viewing Range - Garmin G500H Pilot's Manual

4.8.6

Precipitation (PRECIP) Data Viewing Range

The PRECIP Viewing Range option allows you to select the map range where
at and below the selected value PRECIP weather products will be shown on
the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected,
PRECIP weather data will not be shown. In the figure below where 500 NM is
selected, PRECIP data will be shown at map ranges of 500 NM and lower. TFRs
and METARs are the only weather products shown below 10 NM.
Figure 4-75 GFDS PRECIP Weather Map Display and Legend
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . Turn the large MFD knob to
highlight the Weather Setup option and press ENT
2) Turn the large MFD knob to highlight PRECIP Data Viewing Range. Turn the
small MFD knob to highlight the desired value.
3) Press ENT to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the WX page or turn the large MFD knob to the next option.
4-92
Garmin G500H Pilot's Guide
Area Of No Coverage
Coverage Boundary
.
190-01150-02 Rev. J