Pfd Options - Nav Status; Temperature Reference - Garmin G500H Pilot's Manual

3.2.1.4

PFD Options - Nav Status

When selected, Nav Status information is displayed on the PFD either on the
top of the display (Style 1) or to the left of the HSI (Style 2).
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Nav Status value.
2) Turn the small MFD knob to select the style and press ENT
Style 1 - Top of Display
Style 2 - Left of HSI
3) After the Nav Status style is selected, the chosen style will be displayed on the
PFD.
NOTE: Nav Status option is not available for all installations.
3.2.1.5

Temperature Reference

The computer calculates the temperature based on temperature probe and
pitot/static inputs. The units (°C or °F) and temperature reference are selected
on the AUX – SYSTEM SETUP page. The temperature reference can be selected
to one of the following choices:
• Static Air Temperature (SAT) – This is the calculated temperature of the
stationary (static) outside air. Conceptually, this is the temperature that
would be read on a thermometer floating stationary at the current location.
• Total Air Temperature (TAT) – This is the calculated temperature of the
outside air as it moves past the aircraft, including the rise in temperature
due to air compression and friction at the current airspeed.
190-01150-02 Rev. J
Figure 3-45 Nav Status Style
Garmin G500H Pilot's Guide
.
3-33