Garmin G500H Pilot's Manual page 66

• GPS is the bearing source and an active waypoint is not selected
• ADF is selected and a signal is not received (if you have an ADF that supports
a valid flag then the bearing pointer will be removed. If your ADF system
does not include a valid flag then the bearing pointer will still be displayed,
regardless of ADF signal validity.)
Bearing 2 Pointer
Current Navigation Source
Bearing 1 Source
GPS1
GPS2
VOR1
VOR2
LOC1
LOC2
MSG
LOI
1) Press the PFD soft key to display the navigation source keys.
2) Press the BRG 1 or BRG 2 soft keys to toggle between the available Nav
receivers of the selected source (such as: GPS, NAV, or ADF).
NOTE: The Bearing Line for navigation source 1 (BRG1) will be a single line.
The Bearing Line for navigation source 2 (BRG2) will be a double line.
2-26
CDI
Bearing 1
Pointer Icon
Figure 2-32 HSI with Bearing Information
CDI Source
GPS Advisory
LOI
Figure 2-33 PFD HSI Annunciations
Garmin G500H Pilot's Guide
Bearing 2
Pointer Icon
GPS Mode
Suspend
GPS Level
of Service
Bearing 1 Pointer
Bearing 2 Source
OCN
ENR
TERM
APR
LNAV
LNAV+V
LPV
LNAV/VNAV
LP
LP+V
1.00nm
0.30nm
OBS
SUSP
190-01150-02 Rev. J