Map Feature Options - Garmin G500H Pilot's Manual

3.1.10.1

Map Feature Options

Choose the options to determine the values for display on each Navigation
Map. The options you save will be retained until changed. The options may be
selecting by using the following procedure:
1) While viewing the Navigation Map 1 or 2 of the Map page group, press the
MENU key. With "Map Setup" highlighted, press ENT. With the Map Group
active, turn the large MFD knob to highlight the desired option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
Map Orientation
The Orientation option sets the orientation of the Navigation Map.
North Up At
The North Up At option allows you to select the map range where at and
above the selected value the Map Orientation will automatically change to North
Up. For example, with the 500 NM value selected and the map range of the MFD
is 500 NM or more, the map orientation will automatically become North Up.
190-01150-02 Rev. J
Figure 3-13 Navigation Map Orientation
Garmin G500H Pilot's Guide
3-11