Garmin G500H Pilot's Manual page 146

Ident/Facility/City Selection
The current destination Identifier, Facility Type with icon, Facility Name, and
City (location) are shown in the top window of the Flight Plan mode Waypoint
Information page. The default is the Nearest airport if there is no active flight plan.
New Identifiers may also be selected as shown in section 3.5.3.3.
Identifier
Facility Name
City
1) While viewing the Waypoint Information page of the FPL page group, press
the RWY/FREQ, APT DIR, or WX soft keys to view information about the
waypoint.
2) The current destination Ident, Facility, and City is shown, but may be changed
to find information about other choices. Press the small MFD knob to activate
the cursor. These fields may not be selected if the RWY, APT DIR, or WX pages
are selected. If viewing those pages, press the soft key for that page again to
return to the Waypoint Information page.
3) Use the large MFD knob to highlight the field you wish to change and use the
small MFD knob to change the value.
4) Press the ENT key to save the selected value or press the small MFD knob to
cancel editing.
3-72
Figure 3-104 Flight Plan Ident/Facility/City Detail
Garmin G500H Pilot's Guide
Access (Public/
Private and
Symbol)
190-01150-02 Rev. J