Zoom; Panning; Setup - Garmin G500H Pilot's Manual

3.2.6.2

Zoom

1) While viewing the External Video function, press the Up Rng Arrow key to
increase the zoom up to 10x magnification. Zoom level is made through digital
magnification.
2) Press the Down Rng Arrow key to decrease the zoom level down to a
minimum of 1x.
3) Pressing the FULL soft key toggles between a half and full page view.
3.2.6.3

Panning

1) While viewing the External Video function, press the small MFD knob to
activate panning.
2) Turn the small MFD knob clockwise to pan up (the map will move down).
3) Turn the small MFD knob counterclockwise to pan down (the map will move
up).
4) Turn the large MFD knob clockwise to pan to the right (the map will move left).
5) Turn the large MFD knob counterclockwise to pan to the left (the map will
move right).
6) Press the small MFD knob to exit panning.
3.2.6.4

Setup

The display of each video source is set up individually.
1) While viewing the External Video page, press the soft key for the desired Video
source (Video 1 or Video 2).
2) Press the Setup soft key.
3) The Current value for Brightness will be selected. Use the following directions
for each value.
4) After selecting the desired settings, press the small MFD knob or the Setup
soft key to exit editing.
3-50
Figure 3-67 External Video Setup
Garmin G500H Pilot's Guide 190-01150-02 Rev. J