Gfds Data Request Auto Request - Garmin G500H Pilot's Manual

Diameter/Route Width GFDS Data Request
1) After selecting a coverage option in the previous section, the Diameter/Route
Width field will now be highlighted.
2) Turn the small MFD knob to select the desired
press ENT
.
4.8.5.2

GFDS Data Request Auto Request

Turn the large MFD knob to highlight "Auto Request - Update Rate."
1)
Turn the small MFD knob to select "Off" or an Update Rate. When finished
2)
selecting the Update Rate, press ENT
at each power cycle.
Figure 4-73 GFDS Data Request Auto Update Rate
4-90
Figure 4-72 Waypoint GFDS Data Request Range
Garmin G500H Pilot's Guide
Diameter/Route Width
. The Update Rate will default to "OFF"
and then
190-01150-02 Rev. J