Airspeed Reference Marks - Garmin G500H Pilot's Manual

Figure 3-42 Aux Mode Display Brightness Mode Selection
3.2.1.2

Airspeed Reference Marks

The airspeed reference marks for the PFD are adjusted with this function.
A marker will appear on the PFD Airspeed tape at the selected speed when the
value is set to "On." Default reference airspeeds are set during installation. When
power is cycled, the values you set will be reset to the default values.
NOTE: When power is cycled, the Airspeed Reference values are reset.
During preflight, the Airspeed Reference values should be checked and
set appropriately for the current aircraft configuration and performance.
Figure 3-43 Airspeed References shown on PFD when activated
190-01150-02 Rev. J Garmin G500H Pilot's Guide
3-31