Winds Aloft - Garmin G500H Pilot's Manual

4.9.5.8

Winds Aloft

Winds Aloft data shows the forecast wind speed and direction at the surface
and at selected altitudes. Altitudes can be selected in 3000 foot increments from
the surface up to 42,000 feet MSL by pressing the WX Alt Dn or WX Alt Up
soft keys.
Figure 4-100 FIS-B Weather - Winds Aloft Legend
The Winds Aloft Data Viewing Range option allows you to select the map
range where at and below that value Winds Aloft weather products will appear
on the selected MFD FIS-B Weather Map page (1, 2, or 3). When Off is selected,
Winds Aloft will not be shown. For the value (such as 150 NM) selected, Winds
Aloft data will be shown at map ranges of that value (such as 150 NM), and
lower.
1) While viewing a FIS-B Weather Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
"Weather Setup" option. Press ENT
2) Turn the large MFD knob to highlight the Winds Aloft Data Viewing Range
value.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
4-120
.
Garmin G500H Pilot's Guide 190-01150-02 Rev. J