Garmin G500H Pilot's Manual page 254

Winds Aloft Data Viewing Range
The Winds Aloft Data Viewing Range option allows you to select the map
range where at and below that value Winds Aloft weather products will appear
on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected,
Winds Aloft will not be shown. When 150 NM is selected, Winds Aloft data will
be shown at map ranges of 150 NM and lower.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . Turn the large MFD knob to
highlight the Weather Setup option and press ENT
2) Turn the large MFD knob to highlight Winds Aloft Data Viewing Range.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the WX page or turn the large MFD knob to the next option.
4-104
Garmin G500H Pilot's Guide
.
190-01150-02 Rev. J