Setting The Altitude Minimums Alerter - Garmin G500H Pilot's Manual

5.1.5.3

Setting the Altitude Minimums Alerter

1) While viewing the Charts Page of the FPL page group, press the Menu key.
With the Set Minimums item highlighted, press ENT.
2) With the Minimums Source highlighted, select the Altitude Minimums Alerter
source with small MFD knob.
3) Turn the large MFD knob to highlight the Altitude Minimums value. Turn the
large and small MFD knobs to change the Altitude Minimums value and then
press ENT to activate the selected value.
Alerting is inhibited while the aircraft is on the ground and until the aircraft
reaches 150 feet above the MDA. The Minimum altitude will be available in the
Altitude Alerter.
In dual installations, the minimums alerting altitude value may be set from
either GDU 620 and will be synchronized on both units.
NOTE: If you highlight the Minimums Altitude field on the FPL page and
press the CLR key, it will turn the minimums functionality off.
190-01150-02 Rev. J
Figure 5-14 Minimums Source Selection
Figure 5-15 Minimums Altitude Selection
Garmin G500H Pilot's Guide
5-15