Garmin G500H Pilot's Manual page 247

Figure 4-80 GFDS Weather - AIRMETs/SIGMETs Detail and Legend
When enabled, the following AIRMETs are available for display:
• Icing
• Turbulence
• IFR conditions
• Mountain obscuration
• Surface winds
SIGMET/AIRMET Viewing Range
The SIGMET/AIRMET Viewing Range option allows you to select the map
range where at and below that value SIGMET/AIRMET products will be shown
on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected,
SIGMET/AIRMET will not be shown. Where a value (such as 250 NM) is
selected, SIGMET/AIRMET data will be shown at map ranges of the selected
value (250 NM) and lower.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options. Turn the large MFD knob to
highlight the Weather Setup option and press ENT.
2) Turn the large MFD knob to highlight SIG/AIR Viewing Range.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the WX page or turn the large MFD knob to the next option.
190-01150-02 Rev. J Garmin G500H Pilot's Guide
4-97