Installing An Unshielded Ethernet Connector - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Figure 9-52 Installed shielded Ethernet connector
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown
in Figure
Figure 9-53 Removing a shielded Ethernet connector
----End

9.2.4.3.2 Installing an Unshielded Ethernet Connector

Procedure
Step 1 Hold the male and female connectors, with the male connector facing the female connector, as
shown in
Issue 05 (2018-07-30)
9-53.
Figure 9-54.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Appendix
167