Connecting The Ac Power Cable - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
NOTE
Place the dust plug in an appropriate place. After optical fibers are removed from the optical module,
cover the optical module with the dust plug to protect it from dust.
Step 3 Before connecting optical fibers, attach temporary labels on both ends of each optical fiber to
identify them. For details on how to make labels of optical fibers, see
Labels for Optical
Step 4 Remove the dust caps from the fiber connectors. Connect one end of the optical fiber to the
optical module and the other end to the remote device.
NOTE
Connect the receive and transmit ends of the fiber connector according to the identifiers on receive and
transmit bores of the optical module. Do not connect the two ends reversely.
SYS ACT
SRU40
Step 5 Arrange the optical fibers to make them parallel and bundle them with fiber binding tape at an
interval of 150 mm to 300 mm.
Step 6 Replace all the temporary labels with formal labels on the optical fibers.
----End

7.5.5 Connecting the AC Power Cable

Context
To avoid electric shock, do not connect power cables while the power is on.
Issue 05 (2018-07-30)
Fibers.
micro SD
ACT
DANGER
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
GE1
ON
STATUS
OFF
PWR350A
GE1
LINK0 LINK1
EN EN
ACT0 ACT1
GE0 GE1 GE2 CON/AUX
Optical fiber
Optical interface of
the remote device
9.5.2 Engineering
AR2200 Series
STATUS
10PWR 9PWR 12
F
11 SRU A
~100-240V;50/60Hz;5A N
RST
FAN
117