Huawei AR100 Series Hardware Installation And Maintenance Manual page 46

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Step 4 Move the RPS150 into the cabinet. Support the bottom of the RPS150 with one hand and
tighten the M6 screws on the mounting brackets with the other hand. Tighten the lower screws
first, and then the upper screws.
Step 5 Connect the RPS cable.
1. Put the TOP side of the RPS cable plugs upwards. Connect one end of the RPS cable to
the RPS input interface on the router, and connect the other end to the RPS output
interface on the RPS150.
2. Tighten the captive screws at two sides of the RPS cable plugs clockwise.
Issue 05 (2018-07-30)
LINK
LINK
ACT
ACT E1
LINK LINK D
SLO T CAR
ACT ACT SA
LINK
LINK
ACT
ACT E1
LINK LINK
SLO T CAR D
ACT ACT SA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing AR2201-48FE/AR2202-48FE Routers
4
1 U
-48 FE
AR2 202
ON
OFF
Hz;3 A
0V;5 0/60
~10 0-24
+12V ; 11.5A
-48 FE
AR2 202
ON
OFF
Hz;3 A
0V;5 0/60
~10 0-24
+12V ; 11.5A
40