Powering On And Off The Router - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
l If the DC power supply system for the router requires OT bare crimp terminals, assemble
the DC power cables by referring to
Figure 7-12 Installing an OT bare crimp terminal
1
Step 5 Connect the DC power cables.
1. Insert the one end of the DC power cables to the DC power terminals on the DC power
module.
2. Connect the other end of the power cables to output terminals of the external DC power
supply system.
SYS ACT
SRU40
----End
Follow-up Procedure
Perform the following operations after connecting the DC power cables:
l Verify that DC power cables are securely connected to the power terminals.
l If multiple routers are installed, attach labels to both ends of each power cable and write
numbers on the labels to identify them.

7.6 Powering On and Off the Router

Context
Before you power on the router, check and ensure the following:
Issue 05 (2018-07-30)
2
L
L1
micro SD
ACT
NEG(-) RTN(+)
DC power supply system
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
Figure 7-12.
L2
NEG(-) RTN(+)
PWR STATUS
OFF ON
PWR350D
-48 -60V;9.6A
GE1
LINK0 LINK1
EN EN
ACT0 ACT1
GE0 GE1 GE2
DC power cable
3
AR2200 Series
STATUS
10PWR 9PWR 12
F
11 SRU A
N
CON/AUX RST
FAN
121