Huawei AR100 Series Hardware Installation And Maintenance Manual page 34

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
2. Connect the DB9 connector of the console cable to the serial interface (COM) of a
management PC.
CON/AUX
----End
Follow-up Procedure
After connecting the console cable, configure the serial port communication software on the
management PC, so that you can log in to the command line interface (CLI) of the router. The
following describes how to set the serial port communication software on the Windows XP
and Windows 7 operating systems.
l
Windows XP
a.
b.
c.
l Windows 7
The Windows 7 operating system does not provide the HyperTerminal. You can
download free HyperTerminal software, such as PuTTY, from the Internet. The
following example describes how to use the PuTTY software.
Issue 05 (2018-07-30)
CON/AUX
ADSL
WiFi 1
FXS 3 FXS 2 FXS 1
Console cable
Start HyperTerminal provided by the Windows system or a third-party serial port
communication program on the management PC.
Create a connection, select a serial port, and configure the following parameter
settings:
Bits per second: 9600
n
Data bits: 8
n
Parity: None
n
Stop bit: 1
n
Flow control: None
n
Click OK. The router copyright statement is displayed on the HyperTerminal. Enter
the default user account admin and password Admin@huawei as prompted to log
in to the CLI of the router.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing AR100/AR120/AR150/AR160/AR200 Series
Power Outage Survival
FXS 0 FXO FE3 FE2 FE1 FE0 WAN
COM
Routers
WiFi 0
RESET 12V;5A
28