Connecting Ethernet Cables - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
d.

5.3.3 Connecting Ethernet Cables

Context
l Do not power on the router before you finish connecting cables.
l Notice flags on interfaces when connecting cables. Incorrect cable connection may
damage interface modules or the router.
Tools and Accessories
l Diagonal pliers
l Cable ties
l Marker
l
Network cables (separately purchased)
l Network cable labels
Procedure
Step 1 Select Ethernet cables of appropriate quantity and lengths according to the number of ports
and measured cabling distances.
Step 2 Attach temporary labels to both ends of each Ethernet cable and write numbers on the labels
to identify the Ethernet cables. For details, see
Cables.
Step 3 Lead the Ethernet cables into the cabinet from the top cable inlet (for overhead cabling) or
bottom cable inlet (for on-ground cabling), and route the cables from one side of the cabinet.
Step 4 Connect one end of an Ethernet cable to an Ethernet interface of the router and the other end
to an Ethernet interface of the remote device.
Issue 05 (2018-07-30)
Click Open. The router copyright statement is displayed. Enter the default user
account admin and password Admin@huawei as prompted to log in to the CLI of
the router.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Installing AR2201-48FE/AR2202-48FE Routers
9.5.3 Engineering Labels for Network
47