Connecting The Power Adapter - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
l Marker
l Network cables (separately purchased)
l Network cable labels
Procedure
Step 1 Select Ethernet cables of appropriate quantity and lengths according to the number of ports
and measured cabling distances.
Step 2 Attach temporary labels to both ends of each Ethernet cable and write numbers on the labels
to identify the Ethernet cables. For details, see
Cables.
Step 3 Connect one end of an Ethernet cable to an Ethernet interface of the router and the other end
to an Ethernet interface of the remote device.
CON/AUX
Step 4 Arrange the Ethernet cables to make them parallel, and then bundle them with cable ties. Use
diagonal pliers to cut off redundant cable ties.
Step 5 Remove the temporary labels from the Ethernet cables, and then attach formal labels 2 cm
away from the connectors at both ends.
----End
Follow-up Procedure
Check the following items after connecting Ethernet cables:
l Labels are correctly filled and securely attached to cables, with texts facing the same
direction.
l Cables and connectors are complete, intact, and tightly connected.

4.7.4 Connecting the Power Adapter

Issue 05 (2018-07-30)
FE3
ADSL
WiFi 1
Power Outage Survival
FXS 3 FXS 2 FXS 1 FXS 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing AR100/AR120/AR150/AR160/AR200 Series
9.5.3 Engineering Labels for Network
FE2 FE1 FE0 WAN
WiFi 0
FXO FE3 FE2 FE1 FE0 WAN
Network cable
Routers
RESET 12V;5A
Ethernet interface of
the remote device
30