Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
l
Wall anchors and mounting screws (separately purchased)
Procedure
Step 1 Use a measuring tape to determine positions of two mounting holes, keep the two positions
aligned, and mark the positions with a marker.
Step 2 Drill holes and install mounting screws.
1.
Choose an appropriate drill bit according to the diameter of the mounting screws. The
diameter of the mounting screws cannot exceed 4 mm.
2.
Hammer the hollow wall anchors into the mounting holes.
3.
Use a Phillips screwdriver to screw the mounting screws into the wall anchors. Leave the
screws protruding 2 mm from the wall.
a
c
Step 3 Align the mounting holes on the rear of the router with mounting screws and hang the router
on the mounting screws.
Issue 05 (2018-07-30)
2 7 0 m m
90°
2mm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
b
90°
65