Huawei AR100 Series Hardware Installation And Maintenance Manual page 159

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Figure 9-28 Components of an unshielded RJ45 connector and cable
A. Plug of connector
Procedure
Step 1 Remove a 16-mm (0.63 in.) long section of the jacket, as shown in
When you remove the shield layer, do not damage the insulation of the twisted-pair cable.
Figure 9-29 Removing the jacket of a twisted-pair cable (unit: mm (in.))
Step 2 Align the four pairs of wires and cut the ends neatly, as shown in
connections between the wires and the pins are listed in
Figure 9-30 Connections between wires and pins (unit: mm (in.))
Pin 8
Pin 1
Issue 05 (2018-07-30)
A
B
C
NOTICE
White-Orange
White-Green
White-Brown
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
B. Jacket C. Twisted-pair wires
Table 9-11.
Orange
Blue
White-Blue
Green
Brown
16
9 Appendix
Figure 9-29.
Figure 9-30. The
C
153