Contents Of Engineering Labels - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Figure 9-87 Binding the label for the power cable
Cable
The identification card is on the
top of the cable in horizontal
cabling.

9.5.1.6 Contents of Engineering Labels

Contents of Labels for Power Cables
Labels for power cables are affixed on only one side of the identification plates. On the labels,
there is information (the part after the word "TO:") about the location of the device on the
other end of the cable, like the location of control cabinet, distribution box or power socket.
Contents of Labels for Signal Cables
The two sides of the label affixed on the signal cable carry information about the location of
the ports connected to both ends of the cable.
sides of the labels affixed to the signal cables.
l
Area 1 contains the location information of the local end of the cable.
l
Area 2 (with the word "TO:") contains the location information of the opposite end of the
cable.
l Area 3 has been folded up inside the label.
Figure 9-88 Printed parts on the label for signal cables
Seen from the cabling end of the equipment, the text part of the label is on the right side of the
cable. The side with "TO:" that is facing outside carries the location information of the
opposite end; and the other side carries the location information of the local end.
Issue 05 (2018-07-30)
TO:
B03 -48V2
The identification card is to
the right of the cable in
vertical cabling.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 9-88 shows the information on both
9 Appendix
200