Replacing A Sim Card (On A Card) - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Step 2 Remove the optical fibers on the optical module.
Mark the positions of the Tx and Rx optical fibers on the bores of the optical module, and
then remove the optical fibers.
Step 3 Cover the removed optical fibers with dust caps.
Step 4 Remove the optical module.
1. Rotate the handle of the optical module down.
2. Pull the handle of the optical module and press the router panel with your thumb to
remove the optical module.
Step 5 Insert a new optical module into the optical interface until the optical module is secured in the
optical interface.
Step 6 Connect the Tx and Rx optical fibers to the marked positions.
Step 7 Check the LINK indicator on the optical interface. If the LINK indicator turns green, the new
optical module works normally.
----End

8.5 Replacing a SIM Card (on a Card)

Context
NOTE
A SIM card is not hot swappable.
Table 8-1
Issue 05 (2018-07-30)
lists the cards that support SIM card replacement.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Maintaining a Router
130