Huawei AR100 Series Hardware Installation And Maintenance Manual page 22

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Context
l It is not recommended to install a Wi-Fi-capable router in a cabinet.
l The AR100 Series, AR129CGVW-L, AR129CVW, AR129CV, AR169CVW-4B4S or
AR169CVW router cannot be installed in a cabinet.
l Leave at least 50 mm of clearance around the router for heat dissipation.
l Seen from the front panel of the router, the airflow of the router is left to right.
l If multiple routers are installed in a cabinet, it is recommended that at least 1 U of space (1
U = 44.45 mm) be kept between two routers. These routers must have the same airflow
direction; otherwise, heat dissipation is affected by hot air circulation.
Make sure the following before the installation:
l The cabinet is well fixed.
l The router installation position in the cabinet is determined and arranged properly.
l The router to be installed is available and located near the cabinet for convenient
movement.
Tools and Accessories
l Phillips screwdriver
l
Flat-head screwdriver
l Floating nuts
l Mounting brackets
l M4 screws
l
M6 screws
NOTE
The mounting brackets, floating nuts, M4 screws, and M6 screws are not included in the installation
accessory package and need to be purchased separately.
Procedure
Step 1 Use a Phillips screwdriver to fix the mounting brackets to both sides of the router with M4
screws.
NOTE
The mounting brackets can be installed on both sides close to the front panel or rear panel.
Issue 05 (2018-07-30)
NOTICE
AD SL
WiF i 1
FX S 2
FX S 3
CO N/A UX
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing AR100/AR120/AR150/AR160/AR200 Series
WiF i 0
RE SE T
N
FE 0 WA
FE 1
FE 2
FE 3
FX O
FX S 0
FX S 1
Routers
12 V;5 A
16