Huawei AR100 Series Hardware Installation And Maintenance Manual page 81

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
Step 5 Connect the RPS cable.
1. Put the TOP side of the RPS cable plugs upwards. Connect one end of the RPS cable to
the RPS input interface on the router, and connect the other end to the RPS output
interface on the RPS150.
2. Tighten the captive screws at two sides of the RPS cable plugs clockwise.
Step 6 Connect the RPS AC power cable.
Connect one end of the RPS AC power cable to the power jack of the RPS150 and the other
end to an AC power outlet. Connect the RPS AC power cable to the same power supply
system as the router or a different power supply system, depending on the reliability
requirement.
Figure 6-4 Same external power supply system for the RPS150 and router
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
75