Assembling Power Cables; Assembling The Ot Terminal And Power Cable - Huawei AR100 Series Hardware Installation And Maintenance Manual

Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
– Cut all the exposed copper wires.
– Try to avoid a second crimping of sleeves.
– Keep all the conductors clean and aligned.
NOTE
The connectors, cables, and tools provided by different vendors may be different. The figures in this
document are for your reference only.

9.2.2 Assembling Power Cables

9.2.2.1 Assembling the OT Terminal and Power Cable

Context
Figure 9-1
Figure 9-1 Components of an OT terminal and a power cable
A. Heat-shrinkable tubing
Procedure
Step 1 Based on the cross-sectional area of the cable conductor, strip a length of insulation coating C
to expose the conductor D of length L1, as shown in
L1 are listed in
Issue 05 (2018-07-30)
shows the components of an OT terminal and a power cable.
B. Bare crimping terminal
Table 9-6.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
C. Insulation D. Conductor
Figure 9-2. The recommended values of
9 Appendix
138