Pushbuttons - Mircom FX-2200 Series Programming Manual

Msg Receive Check Box
The Msg Receive check box is an option for annunciators with LCDs only. If marked, this
annunciator receives messages about this input point to display in its Alarm List. If not marked, the
annunciator does not receive messages about this input point to display in its Alarm List.

2.13 Pushbuttons

The push buttons, located on the right side of the window, are:
• Exit: Closes the Relate Window and returns to the previous window.
• Map: Displays and/or updates the Map Window. See section 2.8 Map Window of the
Mircom Programming Interface Database Editor.
• Verify List: Displays the Verify List. If there is no Verify List, a requester will appear asking
whether you wish to perform a verification. See the Mircom Programming Interface
Database Editor for a full description of the Verify List and its uses.
• View Groups: Displays the Groups Window. This is for reviewing the defined groups. No
editing can be done to the groups. To edit the groups, return to the System Window. See
FX-2200 Programming Manual
39