Chapter 1: Introduction
Use the procedures in this document to install a new Avaya G650 Media Gateway, connect it to
the customer's network, and test the complete configuration.
The G650 Media Gateway provides card slots for up to 14 TN-type circuit packs, redundant,
hot-swappable power supplies, and AC or DC power. The backplane can support 14 circuit
packs, 2 power supplies, and provides monitoring of system fans, power supplies, and
temperature. Up to five G650 Media Gateways can be mounted in an EIA-310 standard 19-inch
(48 cm) rack.
To configure the various pieces of hardware, you can use either of the following administration
interfaces:
The Maintenance Web Interface
●
A command line interface that uses either telnet or Native Configuration Manager
●
This installation document contains the following information:
Preinstallation requirements
●
High-level overview of the installation process
●
Installing and cabling the G650 Media Gateway
●
Connecting to the customer's network
●
Audience
This documentation is for the following audiences:
Trained field installers
●
Technical support personnel
●
Authorized Business Partners
●
on page 10
on page 11
on page 13
on page 53
Issue 2 February 2007
7