Limits, Marker, And Machine Direction; Figure 3-3: Machine Direction - Aerotech ANT130LZ-035 Hardware Manual

Electrical Specifications and Installation

3.4. Limits, Marker, and Machine Direction

Aerotech stages are configured to have positive and negative "machine" directions. The machine direction
defines the phasing of the feedback and motor signals and is dictated by the stage wiring (refer to
3.5. for Motor and Feedback phasing information). Programming direction of a stage is set by the controller
that is used to move the stage. Programming direction is typically selectable in the controller, while machine
direction is hardwired in the stage.
28
Figure 3-3 shows the machine direction of ANT130LZ stages.
Figure 3-3: Machine Direction
Chapter 3
ANT130LZ Hardware Manual
www.aerotech.com
Section