Table of Contents
Advertisement
ANT130LZ Hardware Manual
Chapter 4: Maintenance
N O T E : If the bearing area is not kept free of foreign matter and moisture, the performance and life
expectancy of the stage will be reduced.
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical
power prior to performing any maintenance or making adjustments to the equipment.
4.1. Service and Inspection Schedule
Inspect the ANT130LZ at least once per month. A longer or shorter inspection interval may be required
depending on the application and conditions, such as the duty cycle, speed, and environment.
Monthly inspections should include but not be limited to:
Visually inspect the stage and cables.
l
Re-tighten loose connectors.
l
Replace or repair damaged cables.
l
Clean the ANT130LZ and any components and cables as needed.
l
Repair any damage before operating the ANT130LZ.
l
Inspect and perform an operational check on all safeguards and protective devices.
l
www.aerotech.com
Chapter 4
Maintenance
31
Advertisement
Table of Contents
