Galvo Connections (J201 And J202); Table 2-18: Galvo Connector Pinout (J201 And J202); Table 2-19: Mating Connector Part Numbers For The Galvo Connector (J201 And J202) - Aerotech A3200 Nmark GCL Hardware Manual

Nmark GCL Hardware Manual

2.6. Galvo Connections (J201 and J202)

Each Galvo connector (a 25-pin, D-style connector) has 2 analog encoder inputs, 5 volt encoder power, and
galvo motor connections.
Table 2-18: Galvo Connector Pinout (J201 and J202)
Pin Description
1 Sine 1+
2 Cosine 1+
3 Encoder Ground
4 Sine 2+
5 Cosine 2+
6 Clockwise End of Travel Limit
7 Marker 1+
8 Encoder Power (+5V, 500 mA)
9 Motor Over Temperature Thermistor
10 Flash Configuration
11 Frame Ground
12 Motor +
13 Motor +
14 Sine 1-
15 Cosine 1-
16 Encoder Ground
17 Sine 2-
18 Cosine 2-
19 Counterclockwise End of Travel Limit
20 Marker 1-
21 Encoder Ground
22 Encoder Ground
23 Frame Ground
24 Motor -
25 Motor -
Table 2-19: Mating Connector Part Numbers for the Galvo Connector (J201 and J202)
Mating Connector
25-Pin D-Connector
Backshell
www.aerotech.com
Installation and Configuration
Aerotech P/N
ECK00101
ECK00656
Chapter 2
In/Out/Bi Pin Location
Input
Input
--
Input
Input
Input
Input
Output
Input
Input
--
Output
Output
Input
Input
--
Input
Input
Input
Input
--
--
--
Output
Output
Third Party P/N
FCI DB25P064TXLF
Amphenol 17E-1726-2
33