Nmark GCL Hardware Manual
Quick Installation Guide
This chapter describes the order in which connections and settings should typically be made to the
Nmark GCL. If a custom interconnection drawing was created for your system (look for a line item on your
Sales Order under the heading "Integration"), that drawing can be found on your installation device.
Device Number
FireWire
Digital / Analog I/O
Galvo Connections
Control Supply
Motor Supply
www.aerotech.com
Section 2.1. Communication Channel Settings
Section 2.3. FireWire Interface
Section 2.7. Digital and Analog I/O (TB102 A/B)
Section 2.6. Galvo Connections (J201 and J202)
Section 2.2.1. Control Supply Connections (TB104)
Section 2.2.2. Motor Supply Connections (TB201)
Quick Installation Guide
11