Product Compliance - Renishaw VIONiC RTLC20-S Installation Manual

Product compliance

c
Renishaw plc declares that the VIONiC encoder system complies with the applicable standards
™
and regulations. A copy of the EU declaration of conformity is available from our website at
www.renishaw.com/productcompliance
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or
authorised representative could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used
with the unit to ensure compliance.
Patents
Features of Renishaw's encoder systems and similar products are the subjects of the following
patents and patent applications:
EP1173731 IL146001 JP4750998
EP1766334 JP4932706 US7659992
US7550710 CN101300463 EP1946048
CN101310165 EP1957943 US7839296
JP5002559 US8987633 US8466943
Further information
Further information relating to the VIONiC encoder range can be found in the VIONiC series encoder
system data sheet (Renishaw part no. L-9517-9678), Advanced Diagnostic Tool ADTi-100 data sheet
(Renishaw part no. L-9517-9699), Advanced Diagnostic Tool ADTi-100 and ADT View software quick-start
guide (Renishaw part no. M-6195-9321), and the Advanced Diagnostic Tool ADTi-100 and ADT View
software user guide (Renishaw part no. M-6195-9413). These can be downloaded from our website
www.renishaw.com/opticalencoders and are also available from your local Renishaw representative.
This document may not be copied or reproduced in whole or in part, or transferred to any other media
or language, by any means without the written prior permission of Renishaw. The publication of material
within this document does not imply freedom from the patent rights of Renishaw plc.
VIONiC RTLC20-S installation guide
US6775008 CN100543424
CN100507454 JP5386081
JP5017275 US7624513
CN1314511 EP1469969
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT
IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS
REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY
INACCURACIES IN THIS DOCUMENT.
The packaging of our products contains the following materials and can be recycled.
Packaging Component Material
Outer box Cardboard
Polypropylene
Inserts Low Density Polyethylene Foam
Cardboard
Bags High Density Polyethylene Bag
Metalised Polyethylene
REACH regulation
Information required by Article 33(1) of Regulation (EC) No. 1907/2006 ('REACH') relating to products
containing substances of very high concern (SVHCs) is available at
The use of this symbol on Renishaw products and/or accompanying documentation indicates that the
product should not be mixed with general household waste upon disposal. It is the responsibility of the end
user to dispose of this product at a designated collection point for waste electrical and electronic equipment
(WEEE) to enable reuse or recycling. Correct disposal of this product will help to save valuable resources
and prevent potential negative effects on the environment. For more information, please contact your local
waste disposal service or Renishaw distributor.
ISO 11469 Recycling Guidance
Not applicable Recyclable
PP Recyclable
LDPE Recyclable
Not applicable Recyclable
HDPE Recyclable
PE Recyclable
www.renishaw.com/REACH
1