Product Compliance - Renishaw TONiC FS T3 Series Functional Safety Installation Manual And Safety Manual

Product compliance

This document is an installation guide and safety manual, which details the actions required for the safe
integration of the TONiC FS (Functional Safety) encoder system, as designated by the T3 prefix in the part
number, into a functionally safe system; this will be referred to as TONiC FS system in the below document.
SIL2
FUNCTIONAL
SAFETY
PLd
The TONiC FS system as defined below is suitable for use in a Category 3 performance level d (PLd)
application in compliance with ISO 13849 and in a safety integrity level 2 (SIL2) application in compliance
with IEC 61508 and IEC 61800-5-2 when installed and operated in accordance with the instructions defined.
Failure to follow the correct use instructions or heed the limitations may result in SIL2 and/or PLd
not being achieved and will invalidate the Functional Safety certification.
A copy of the TONiC FS certificate is available from our website at www.renishaw.com/productcompliance.
C
Renishaw plc declares that TONiC FS system complies with the applicable standards and regulations.
A copy of the EU declaration of conformity is available from our website at
www.renishaw.com/productcompliance.
For further details of FS compliance see 'Certification' on page
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or
authorised representative could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used
with the unit to ensure compliance.
Further information
Further information relating to the TONiC FS encoder range can be found at
www.renishaw.com/fsencoders and is also available from your local representative. This document may
not be copied or reproduced in whole or in part, or transferred to any other media or language, by any
means without the written prior permission of Renishaw. The publication of material within this document
does not imply freedom from the patent rights of Renishaw plc.
TONiC RTLC20-S Functional Safety installation guide and safety manual
4.
Original instructions
Patents
Features of Renishaw's encoder systems and similar products are the subjects of the following
patents and patent applications:
EP0748436 US5861953
CNCN100543424C US7659992
EP1766335 CNCN101300463B
CNCN101310165B US7839296
CN102057256 JP5475759
EP1469969 JP5002559
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT
IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS
REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY
INACCURACIES IN THIS DOCUMENT.
The packaging of our products contains the following materials and can be recycled.
Packaging Component Material
Outer box Cardboard
Polypropylene
Inserts Low Density Polyethylene Foam
Cardboard
Bags High Density Polyethylene Bag
Metalised Polyethylene
REACH regulation
Information required by Article 33(1) of Regulation (EC) No. 1907/2006 ('REACH') relating to products
containing substances of very high concern (SVHCs) is available at www.renishaw.com/REACH.
The use of this symbol on Renishaw products and/or accompanying documentation indicates that the
product should not be mixed with general household waste upon disposal. It is the responsibility of the end
user to dispose of this product at a designated collection point for waste electrical and electronic equipment
(WEEE) to enable reuse or recycling. Correct disposal of this product will help to save valuable resources
and prevent potential negative effects on the environment. For more information, please contact your local
waste disposal service or Renishaw distributor.
EP1173731 US6775008B2 JP4750998
JP4932706 CNCN100507454C US7550710
EP1946048 US7624513B2 JP5017275
EP1957943 US8141265 EP2294363
JP5755299 KR20110033204 CN1314511
US8466943 US8987633
ISO 11469 Recycling Guidance
Not applicable Recyclable
PP Recyclable
LDPE Recyclable
Not applicable Recyclable
HDPE Recyclable
PE Recyclable
1