Installing The Ceiling Mount; Installing The Projector In The Rigging Frame - Christie DHD700-GS User Manual

Installing the ceiling mount

Mount the projector with a Christie-approved mount (such as the Christie One Mount Plus, P/N:
140-117100-XX), using the four mounting points on the underside of the projector.
Warning! Failure to comply with the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
1. Refer to the installation instructions and safety guidelines provided in the mount kit (such as
the Christie One Mount Plus, P/N: 140-117100-XX).

Installing the projector in the rigging frame

Install the projector in a Christie-approved rigging frame (such as the Christie QwikRig Rigging
Frame, P/N: 140-128102-XX), using the four mounting points on the underside of the projector.
Warning! Failure to comply with the following could result in death or serious injury.
• When not mounted properly, the projector may fall.
• The warranty on this projector does not cover damage caused by the use of a non-recommended
ceiling mount kit or installation of the ceiling mount kit in an improper location.
1. Refer to the installation instructions and safety guidelines provided in the rigging frame kit
(such as the Christie QwikRig Rigging Frame, P/N: 140-128102-XX).
GS Series User Manual
020-001044-02 Rev. 1 (07-2016)
Installation
27