Installing The Cable Cover; Installing The Ceiling Mount - Christie DHD599-GS User Manual

Installing the cable cover

1. Rotate the cable cover and insert the two guide pins into the guide holes.
2. Press and hold both lower corners of the cable cover while inserting the sheet clips into the
projector casing.

Installing the ceiling mount

Mount the projector with a Christie-approved mount (such as the Christie One Mount, P/N:
108-506102-XX), using the four mounting points on the underside of the projector.
1. Refer to the installation instructions and safety guidelines provided in the kit (such as the
Christie One Mount, P/N: 108-506102-XX).
GS Series (DHD599-GS, DWU599-GS) User Manual
020-001162-0 Rev. 1 (12-2017)
Guide Pin
Guide Hole
Hold and Press Here
Installation
aaa
31