Multiplecameraex; Multiplecamerawritetodiskex; Multisyncex - FLIR GRASSHOPPER 3 Series Technical Reference

Related Knowledge Base Articles
Recommended or required Windows Service Packs and Hotfixes
B.15 MultipleCameraEx
This example starts multiple cameras using the StartSyncCapture() function. This function synchronizes image
grabbing across all cameras. Additionally, it enables timestamps to be embedded in images, allowing users to
obtain the exact timing of each camera's exposure.
B.16 MultipleCameraWriteToDiskEx
The MultipleCameraWriteToDiskEx shows how to write to disk from multiple cameras.
Available for:
C++
n
B.17 MultiSyncEx
This example synchronizes 1394 cameras on same PC and across PCs. Across PC synchronization is achieved
by linking all of the computers to a single 1394 bus dedicated to sharing timing information (the timing bus). This
requires that a 1394 card on each machine be dedicated to the timing bus.
2/10/2017
©2013-2017
FLIR Integrated Imaging
Solutions Inc. All rights reserved.
Note: Depending on your operating system, for this example to
work on your PC, you may need to install a hotfix from Microsoft.
Title
Note: This example works with FireWire cameras only.
Note: This example works with FireWire cameras only.
Note: This example does not perform image grabbing. You have
to write your own image acquisition program or use existing
FlyCapture2 examples such as MultipleCameraEx to perform
synchronized image grab.
Grasshopper
®
3 PGE Technical Reference
B FlyCapture SDK Examples
Article
Knowledge Base Article 10038
99