Typical Installation; Mounting Bracket; Oil Bar - Graco SDP8 Series Installation And Operation Manual

Typical Installation

The typical installation shown in F
a guide. It is not a complete system design.
Contact your Graco distributor for assistance
in designing a system to suit your needs.
The metered dispense valve is not designed
for in-line installation.
E
F . 4
IG
Ref Description
A Metered dispense valve
B Fluid shut-off valve
C Hose
D Hose reel fluid inlet hose
E Hose reel
A Thermal Relief Kit (not shown) is
required. The kit required will vary by pump
selected.
3A6673B
. 4 is only
IG
B
D
C
A
Typical Installation

Mounting Bracket

Mounting Bracket Kit 249440 is available for
mounting the metered dispense valve on a
console.
F . 5
IG

Oil Bar

An Oil Bar Kit is available for mounting one to
three metered dispense valves. Contact your
Graco Distributor for ordering details.
NOTE: The Utility Menu provides an option to
flip the metered dispense valve display for
easy viewing when the metered dispense
valve is installed in the Oil Bar.
F . 6
IG
9