Graco SDP8 Series Installation And Operation Manual page 25

PRESET
The metered dispense valve can be
programmed to dispense 5 different preset
amounts.
F . 45
IG
1. Use the UP or DOWN ARROW button on
the keypad to highlight the desired
PRESET. Press the center ENTER
button to select it.
2. The screen shown in F
H
R
F . 46
IG
PRESET SETUP SCREEN
H PRESET AMOUNT DISPENSE VOLUME -
Shows the volume of fluid that the meter is
currently set up to dispense. Press the UP
and/or DOWN arrow on the keypad to
increase and/or decrease this quantity. On
the DISPENSE screen this amount is shown
in field (G) (See F
K INCREASE/DECREASE ARROW - The
up/down arrow on the screen indicates the
user can increase or decrease the PRESET
quantity before starting the dispense. Use
the UP or DOWN ARROW button on the key
pad to increase or decrease the PRESET
amount.
3A6673B
. 46 displays.
IG
. 31, page 18).
IG
P PRESET TITLE - Identifies which preset
option is being set up. The example in F
46 shows PRESET1. This means you are
setting up the PRESET parameters for PRE-
SET1 in the list.
R NAME - Additional information about the
PRESET, such as the type of engine or vehi-
cle make/model, fluid type, etc. The example
shown in F
field on the display for PRESET1.
Creating a PRESET
Be sure ENTER in the lower left corner of the
display screen is highlighted (F
1. Use the UP AND DOWN ARROW on the
keypad to increase or decrease the
PRESET AMOUNT (H) (F
2. When you have finished setting the
amount, press the center ENTER button
on the keypad to save the PRESET.
To SET-UP a PRESET NAME:
1. Use the RIGHT ARROW on the keypad
to highlight NAME (F
P
center ENTER button on the keypad to
select NAME.
2. The screen shown in F
K
This screen can be used to create a
unique description for the PRESET.
F . 47
IG
3. Use the UP, DOWN, LEFT and RIGHT
ARROW buttons on the keypad to select
the letters and numbers needed to name
the PRESET.
Preset Mode
. 46 shows F350 in the NAME
IG
IG
. 46).
IG
. 46). Press the
IG
. 47 displays.
IG
.
IG
. 46).
25