Utility Menu - Graco SDP8 Series Installation And Operation Manual

UTILITY MENU

There are three Utility options available from
the UTILITY MENU screen.
•
DEVICE INFORMATION, page 33
•
FLIP DISPLAY, page 34
•
GO BACK, page 34
To select a UTILITY MENU:
1. Activate the meter. No voucher or tag is
required to access the menu. See
Activation, page 29.
2. Press the center ENTER button on the
keypad a second time to bypass the
screen in F . 55. The Main Menu screen
IG
shown in F . 69 displays.
IG
F . 69
IG
3. If UTILITY MENU is not highlighted, use
the DOWN ARROW on the key pad to
highlight it.
4. Press the center ENTER button on the
key pad to select UTILITY MENU.
5. The UTILITY MENU screen shown in
F . 70 displays.
IG
F . 70
IG
3A6673B
Pulse FC Mode
6. Use the UP or DOWN ARROW button to
select the desired screen from the list.
7. When the screen is highlighted, press
the ENTER button on the key pad.
DEVICE INFORMATION
The Device Information Screen is used for
diagnostics only. An example of this screen is
shown in F . 71.
IG
Unique device identification number
Meter firmware version 1_01_007
F . 71
IG
33