Total; Utility Menu; Device Information - Graco SDP8 Series Installation And Operation Manual

TOTAL

M
F . 35
IG
M LIFETIME TOTAL - Running, non-resettable
total quantity fluid that has been dispensed
over the life of the meter. The unit of mea-
surement displayed is determined by the
Unit of Measurement criteria selected in
UTILITY MENU/SET-UP/UNIT OF MEA-
SURE, page 23. When Pints, Quarts or Gal-
lons is selected the Unit of Measurement will
be shown as Gallons. When Liter is selected
the Unit of Measurement will be shown as
Liters.
N RESETTABLE TOTAL - Running total of the
quantity of fluid dispensed through the meter
since the previous total was reset. The unit
of measurement displayed is determined by
the Unit of Measurement criteria selected in
UTILITY MENU/SET-UP/UNIT OF MEA-
SURE, page 23.
GO BACK - Returns to Main Menu screen.
RESET - Resets the Resettable total.

UTILITY MENU

There are four Utility options available from
the UTILITY MENU screen.
•
DEVICE INFORMATION, page 21
•
RESET, page 22
•
SET-UP SCREENS, page 22
•
GO BACK, page 27
To select a UTILITY MENU:
1. Use the UP or DOWN ARROW button to
select the desired screen from the list.
3A6673B
2. When the screen is highlighted (F
press the ENTER button on the key pad.
N
F . 36
IG

DEVICE INFORMATION

The Device Information Screen is used for
diagnostics only. An example of this screen is
shown in F
IG
Unique device identification number
F . 37
IG
Preset Mode
. 37.
Meter firmware version 1_01_007
. 36),
IG
21