Reset; Set-Up Screens - Graco SDP8 Series Installation And Operation Manual

Preset Mode

RESET

Restarts meter. After selecting RESET the
screen display goes blank. After
approximately 10 seconds the screens
shown in F . 38- F
IG
NOTE: The screen shown in F
the user to upgrade for use with a Pulse FC
system. See Pulse FC Mode, page 28 for
instructions.
F . 38
IG
F . 39
IG
F . 40
IG
When the MAIN MENU Screen shown in F
40 displays, the meter is ready to use.
22
. 40 display.
IG
. 38 allows
IG

SET-UP SCREENS

The SET-UP Menu includes the following
options: UNIT OF MEASURE, BANNER,
CALIBRATE and "+++".
A second SET-UP screen is accessed by
selecting the "+++".
This screen includes options for
LANGUAGE, PRESET, FLIP DISPLAY and
LOCK SETTINGS. This screen also includes
a GO BACKoption to return to the user to the
UTILITY MENU screen.
F . 41
IG
1. Use the UP or DOWN ARROW button on
the keypad to select one of the SET-UP
options.
2. When the desired SET-UP option is
highlighted, press the center ENTER
button on the keypad
.
IG
3A6673B