Technical Specifications - Graco SDP8 Series Installation And Operation Manual

Technical Specifications

Metered Dispense Valve
Flow range*
*Tested in 10W motor oil. Flow rates vary with fluid pressure, temperature and viscosity.
Maximum Working Pressure
Units of Measure (factory set to
quarts)
Weight
Dimensions (without extension)
Length
Width
Height
Units of measure (factory set in
quarts)
Inlet
Outlet
Operating temperature range
Storage temperature range
Battery**
**Recommended Battery: Energizer
NFC Frequency Band
Maximum NFC Transmit Power
Wetted parts
Fluid compatibility
Metered Dispense Valve
Accuracy†
† At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10-weight oil and one gallon dispensed. May
require calibration.
3A6673B
Technical Specifications
US
0.25 to 18 gpm
1500 psi
pints, quarts, gallons
5.3 pounds
13 inches
3.75 inches
5.75 inches
maximum recorded dispensed volume = 9999 units
maximum preset volume = 9999 units
1/2-14 npt or 3/4-14 npt
3/4-16 straight thread o-ring boss
4°F to 158°F
-40°F to 158°F
4AA alkaline batteries
®
Alkaline E91.
13.56 Mhz
1 mW (0 dBm)
aluminum, stainless steel, PBT, nitrile rubber, zinc plated
carbon steel, nickel plated carbon steel
antifreeze, gear oil, crankcase oil, ATF
+/- 0.5 percent
Metric
0.9 to 68 lpm
10.34 MPa, 103.4 bar
liters
2.4 kg
33 cm
9.5 cm
14.6 cm
-16°C to 70°C
-40°C to 70°C
41